Recent content by Noswal

Looking for a good 6v 4 wire, 2 speed, reversing heater blower motor for a 1946 Ford/Mercury. Thanks Butch

Found one. No longer looking

Looking for ignition switch for '46 Ford.

Thanks Oldcarbearing. Looks like the ID and length is the same for both so, the '48 it is. Thanks again, this answers my question.

Haven't taken the rear hubs off yet. Was hoping to have all the parts when I start the swap, so I really don't know the size of either bearing.

I'm putting hydraulic brakes on my '31 coupe. Using 1948 Ford hubs and drums on the rear. My question is, do I use the '48 rear wheel bearings with '48 hubs on '31 spindles or '31 wheel bearings? Thanks in advance for any help.

Thanks everybody. I'll contact 32phil. Hopefully he can help.

Called every locksmith in my area. They concentrate in reprograming FOB's, unlockong doors and residential stuff. Each one said this is too old for them to fool with.

Any locksmiths on the forum? I have a 1954 Customline that I need the ignition switch changed to fit my key. Thanks. Butch

I have a 1946 Mercury coupe and need to replace the glass on the rear side windows. Can anybody tell me how the stainless around the glass disassembles? Can I remove the front part of the stainless and replace the glass? Or, do I have to take the glass completely out? I really don't want to...

Found a column. No longer looking. Thanks

Looking fora Fordomatic steering column from a '55 or older Ford or Mercury car or a '57 - '60 F100. Must be an automatic column.

Thank you, Bob!!!! That's exactly what I was looking for. Butch

A friend of mine has acquired a supercharged '39 Zephyr. I has two 6 volt batteries and some sort of device below the solenoid that lets it start on 12 volts and reverts to 6 volts once it starts. The device went bad and he found a NOS on ebay. He put this thing on and now he has no power at...

I have a set of C9TE heads from a 1969 F100 with a 302 engine. Does anyone know if these have the same size intake and exhaust runners as the C9OE car heads from the same year? I know the combustion chamber is 58cc on the truck and 60 on the car heads, but was curious about the runners. Thanks.