Recent content by modela mike

I attended a technical seminar last year put on by Les Andrews and he does not recommend the use of the teflon bushings

I have straightened the axles on both of my cars. I removed them from the car stripped them down then used 4 alignment pins made for me by a friend that has a lathe. Found both axles were bent from left to right - straightened them in a 20 ton press. After that they needed very little twisting...

Great! Thank you for your help.

Does anyone know if 1928-29 pick-up doors will fit an AA?

I have successfully welded in patch and redrilled the hole and also "V" out and welded up small cracks in the front crossmember - someone had installed an incorrect front mount causing undo pressure in this area. I did the repair about 2 years ago and it is holding up well.

I am looking for the inner piece of the rain gutter for the passenger side of a 1930 Murray 4 door sedan

Bratton's sells oversize hinge pins

I bought one from California Car Covers for our 1930 coupe. Fits well, keeps the dirt and bird poop off.:)

I ordered rear door wood for my 1930. Good product, fits well. I believe it is a husband and wife operation, they don't answer the phone because they are out in the shop working. I have found it best to e-mail them, they sometimes answer on the weekends.

Re: Engine Loses Power on Hills We recently had a member in our club with the same issue. After checking all the basics multiple times, he finally discovered that the valves were way out of adjustment.