Recent content by Mikey T

Pete Pa, Thanks again, I'm moving slow, but it does come together like you say. I ordered the Carpenter rear pan today and I'm sending my EMS pan to Kube for his scrap metal pile where it belongs. (thanks Kube for the info) Mocking it up is definitely the way to go otherwise the pan would have...

Thanks Newc, I have the EMS and the tool tray is either too big or the tailpan is too small. How did you widen it? Did you split it and fill in a piece or did you re-bend the sides?

Hey Pete pa, its taking me a while to get it, but its exactly as you described. The small lip on the panel and subrail between the B pillar and the outrigger and again after the outrigger before it starts to rise up over the wheel well. I'm guessing the panel and subrail should be flush where...

You threw me a curve, "Pete Pa" is "Two Couped Up" and Mikey T is Lifter on the HAMB. Doesn't take much for me to get confused these days.

Pete Pa, Thanks for the info. You got me on track with my drip rail install at the HAMB, now I'm in more trouble. Your description of the trunk floor welded to the rear quarter from the tool box to the sub rails is right on. Does the rear quarter get welded to the sub-rail between the "B" pillar...

Thanks 19Fordy I'll do some digging

Thanks, I'll check it out.

Hello and Merry Christmas! I'm piecing together a very worn and torn 1940 coupe that if I had a brain in my head, I would have cut up and moved on, but this is my baby and its going to live again. I've replaced the lower cowls, floor and sub-rails, rear pan and both rear quarters including drip...