Recent content by Mike J. CT
-
49-50 ford convertible solenoid relocate adapter
Excellent used adapter to relocate solenoid on 49-50 Ford convertibles. The X frame interferes with the normal solenoid location. Ford called these "Plate and lever assembly - trans overdrive sliding pawl operating rod". The part number is 8A-6910. Price includes shipping. I have 2 of these...- Mike J. CT
- Thread
- Replies: 0
- Forum: Early V8
-
Calling all Transmission Gurus
I have built many of these and after leaving the cluster in the bottom/side of the case, installing the input and main shaft, installing the input bearing retainer, I tip the transmission up on it's front surface. I use a work mate so the input has clearance. I lean the transmission forward so...- Mike J. CT
- Post #15
- Forum: Early V8 (1932-53)
-
Overdrive using electronic ignition
Thanks Frank, I should have searched further. Mike.- Mike J. CT
- Post #3
- Forum: Early V8 (1932-53)
-
Overdrive using electronic ignition
I recently sold 2 overdrive transmissions for cars that did not previously have overdrive. After the fact I found out that both have electronic ignition. Normally in kickdown the solenoid momentarily grounds out the ignition. How would they wire this and would a ground harm the electronic...- Mike J. CT
- Thread
- Replies: 6
- Forum: Early V8 (1932-53)
-
Calling all Transmission Gurus
As said before this is fairly straight forward but there are a few tricks. What are the main problems that you have?- Mike J. CT
- Post #8
- Forum: Early V8 (1932-53)
-
-
-
-
1957-1962 ford f100 hurst mystery shifter and install kit
NOS Hurst Mystery shifter and installation kit for 57-62 Ford F100/F250 pickup trucks. Pictures show complete kit with shifter, setup mounted on a dummy transmission, and slight modification needed to fit on tailhousing with countersunk holes. Shifts great. Excellent condition but knob has some...- Mike J. CT
- Thread
- Replies: 3
- Forum: Late V8
-
-
-
-
-
-