Recent content by mhaim

I use one for driving and one for show

The first fluid I installed was from Macs and after 2 years it was almost clear. 3 years ago I replaced with Straighteight and it has faded a bit but very readable. My top is down for the whole summer so it receives a lot of sun.

Back in the early 80’s I used a 34 4door as my daily driver. On one winter evening with freezing rain, I drove home, pulled into the driveway and set the hand brake. Next morning with temps below freezing, I started the Ford, put it in gear and relieved the hand brake. The car wouldn’t budge...

The ebrake locks all 4 wheels. Jack up car and see if wheels turn.

My door. Wood is original

Re: Mounting ‘Tubman’ condenser on dome distributor Did this on my car

33-34 boot to use as is or for pattern

I do like the idea of pulling the engine. I can do almost the whole thing standing up. And once it’s out I can do some touch up in the engine bay. Thanks for all the pros and cons. Bill

Rear end it is. Thanks for the help. Bill

Want to replace the transmission in my 34 with a 39 unit I have. Which is easier. Pull the engine or the rear end. Thanks. Bill

Hope this works

I have a 34 but I used the 35-36 brackets to mount the plumbing.

Photos of original 34

Back in the early 30’s a new Thompson cost $225.00. that’s just over 11 $20 gold coins. 11 ounces of gold today is $1300 which is about $14500.00. That’s a lot of money for the cops to pay for one gun.

And still another way to convert. Also get a good quality resister. My repro was junk.