Recent content by Matts30coupe

--sold--

What I believe is a 1932 Ford model B motor. Had it running last year in my car. Has a repair in exhaust port that weeps coolant. If that don't bother you throw the extra gaskets and minor bolts needed and run it, or steal all the good parts off it. Good carb/ intake, model b cam, balanced...

1930 19" wire wheels from California car. Holds air but need new rubbers. 450.00 for all 5 with caps. call or text Matt 63zero- 77 nine 9 four 9 I

Hey there guys. I am in the process of putting my drivetrain back together. Problem is that my flywheel is pitted on the clutch side. I feel I can take off .020” to clean it up. Question is that how much can I get away with removing? With this throw this out of tolerance? I feel the springs...

Thanks! I figured it was something to help will corrosion. Nosetime, do you remember your specs. Or distance from piston to head? How did it run? Matt

Thank you jack! One question with your info above. What is waste Metal?

Looking to buy a performance head for my model A build. Motor has been freshly rebuilt yrs ago. It was an old guys spare. I will be taking it down to check it all out before building it back up. Question is that I am looking at getting a performance head for it. I would like to shoot for a...

How do you guys feel about the fiber cam gears? What is the benefit? I feel it might be more quite, but that the wear would be premature, and only end up in the oil and the rest of the motor... Where a magnet on the belly of the pan, as well as the factor style "steel gear," your shavings will...

Before I seek machining for my stock A flywheel, I wanted to see if anyone here had one they are willing to sell. If so please contact me with weight and price. Can pickup depending on location. Thanks in advance! Matt

Found one from a member. Thanks to all of the replies! Matt

Bump

Thanks to all that replied!! What a great community here. I will look into a couple of these and see what cam be done. Thanks again!! Matt

Just tore down my 29 motor to find out that the mains babbit is trashed.. Was wondering what something like this cost to do? Located in Joliet IL Matt

Interested as well

Looking for a old or new performance head for my model A Build. Any Make. Ideally looking for 7:1 compression. Open to anything really if it can be worked fixed etc. Interested in what you have. Thanks Matt