Recent content by Masot

Hi guys. This is my adaptation for a diaphragm clutch. before 11" now 10" I made an adapter to center the diaphragm. centering device for screw holes change of centering by bearing new thrust bearing Kit bearing SKF N1444SA I have driven and run well

Thanks Ronnie!

I met Gente here in Spain (Europe) at 93 years old, a genius and a great person.

Thanks. I read that with a more powerful engine it is better to have a 10" clutch disc. I am going to install a diaphragm pressure disc and fit a 10" clutch disc for my Volvo five-speed gearbox.

Hi guys. Do you know the model of pressure plate with diaphragm for 9" to adapt? I looked at information on the forum and only saw 10" on rockauto https://www.rockauto.com/en/catalog/ford,1995,f-150,4.9l+l6,1414583,transmission-manual,clutch+pressure+plate,1988 Thanks

Hi! This is my engine ventilation system. I made a small clean air filter. Invert the system. Now it goes directly under the crankcase, goes up and comes out through the back of the clean air vent. It works very well, now I don't have any oil leaks.

cover is cast iron, perfect fit

the distributor runs clockwise. the rotor advance moves clockwise. is this correct?

I have checked the advance, distributor turn clockwise, advance press by hand and turn clockwise. Turn the lathe and open at 700 rpm. I don't know if the problem is with the engine, the engine is a new project... your progressiveingnition distributor is very interesting. Thank you.

I do the same with Mallory Chevy and Pertronix. The distributor works clockwise.... I don't know what the is problem , I make harder and softer springs... crankshaft always advance clockwise. I adjust my lathe

Thanks

In Germany tax included, shipping 9€... 508€ final price

In Spain you have to pay a lot of taxes... 21% VAT + 20% customs duties + 40€ processing + 50€ shipping. Distributor 450€ + approx. 200€ taxes = 650€ distributor

This is the Summit offer. Is this a genuine unit? I don't want any more problems with distribution. https://www.summitracing.com/cart

Hi I have seen the distributor in Germany. I have read about problems with this distributor. Is this true? England has problems with taxes. Merci...