Recent content by Marty_in_Mesa

DavidG, While I agree, I thought the spring tension may make a difference. I would think there is enough tension to give but not bounce....

DavidG I wonder about the spring tension. I see there are springs for the gas tank itself. Unsure where those would go and whether or not they have more tension than the radiator spring. Marty

Not sure if one could find the correct spring today, but I will look. Marty

DavidG, you have no idea how much I appreciate running into your post. I am in fit/mock up stage now. (Fenderless High Boy) This is the time to check to see how much gap there will be and I will add the 1/8" rubber spacers under the tank, that and the thickness of the tank flange itself seems...

Up until I saw Dave's post, I was going to pie cut the frame above or just behind the axle to bring it up, but I think that 1/4" gap needs to be there for clearance for the tank? Marty

David, this is somewhat timely for me. I am building a 32 Roadster using a heavily modified Henry Ford 32 Frame and a Brookville Roadster Body. Everything was fitting until I got to the back of the car where I noticed a wedge gap from the top of the frame above the axle to the end of the frame...

I added some pictures to my album of the radiator/grill shell showing the inlets and outlets as requested. https://photos.app.goo.gl/9dgiEq4TPAzhtGBj9 Thanks again guys, Marty

I added some pictures to my album https://photos.app.goo.gl/9dgiEq4TPAzhtGBj9 Sent from my Moto G (5) Plus using Tapatalk

So to be clear, the wiring harness itself is supposed to reach up, through the conduit, and into the head light bucket then the plastic piece holds the wires against the socket with the 3 pins? Does the black plastic piece lock into the socket? This is the best piece of information yet. Thank...

Great idea Sofield! Thank you!

Thanks, I've met Sammy! Neat to know they are close and have so much inventory! Sent from my Moto G (5) Plus using Tapatalk

Dennis, I'll try and post some pictures of the back side tomorrow. Sent from my Moto G (5) Plus using Tapatalk

Will check it out. Thanks Ed Marty Sent from my Moto G (5) Plus using Tapatalk

Thanks for the information. I may try this. Though there isn't much of the radiator neck sticking up at all. Sent from my Moto G (5) Plus using Tapatalk

Ah, that's too bad. I wonder if a radiator shop could extend the neck on the radiator. Who makes a good reproduction shell? Sent from my Moto G (5) Plus using Tapatalk