Recent content by lsr490

Motor pics Sent from my SM-S906U using Tapatalk

Pics Sent from my SM-S906U using Tapatalk

Just curious if there is any value in these. The little history that I have this short block arrived in California in the early seventies. The block was cast July 23rd 1962. I believe the motor had around 5k miles on when I decided to rebuild it with inserts and a high compression head.

I really believe best solution since I'm only 5'7" is that you should sell me the car. :):)

Try this one. https://www.usenergyproducts.com/collections/super-shield-1-4-inch-solid-foil-reflective-foam-core-insulation

I'll try to update the link this evening Sent from my SM-G975U using Tapatalk

That was my concern, that is why I used the product I used. If you cut it 1/8" larger the the vertical surface it will stay in place on its own. As you can see my only experience is with a CCPU, cars may have different challenges. The product that M2M and others have mentioned is similar or the...

It's not glued, just lies on top of the floorboards with the floor mat placed on it. Don't be fooled by the glare from my LED light the firewall is a black ABS insulated panel. https://www.snydersantiqueauto.com/ProductDetail/A-18572-C_FIREWALL-INSULATOR-LATE-31?fromCategory=SearchByKeyword

Here are a couple of pictures Sent from my SM-G975U using Tapatalk

I just installed this last December from the belt line down. On the kick and door panels I cut the width just slightly wider than the opening. The floor laid nicely under the mat, surrounded the exposed edges with black Gorilla tape. On the back of cab the three wooden supports the support the...

I was just getting ready to cut four inches out of mine. I had to put a bunch of towels on my firewall getting the engine out. If you had to do it again would you go 14" or 15"? Thanks

Has anyone looked at this http://www.kirkengines.com/index.php#1 ? I have two on hand and looking to install one here shortly.

Re: Bill’s Auto Works I can also attest that he is a great guy and does what he says he'll do.

Fair enough, I was just double checking to make sure I didn't miss an opportunity that was right in front of me. Anyone who knows me knows that I say this all the time " I only have enough money to do this once, and I'm going to do right". Thanks again ps. Jim I just put your book down to...