Recent content by Lar in Stanwood

if you arelooking to sell them I am interested. Lar in stanwood

Just wanted to say thank you gentlemen. Excellent information. I will look for a 97 and go from there. Lar

What size jets did you use in your 97 and did you need a fuel pump/pressure regulator?

Thamk you. What is a 2110 carb?

Just acquired a Burns downdraft manifold for a two throat single carb with a three bolt base mount. I 'd like to know what carb you guys recommend and what modifications, jet sizes are necessary. I plan on using an electric fuel pump with a pressure regulator. Thanks for the help.

Do you have rpu seats available? If so i need some. 425 293 9184

I suggest you look at the thread above titled "My Custom Made Model A Trailer" and scroll down to BRENT in 10-uh-c's quick reply. Brent's home page shows a step by step restoration of a '29 rpu. I would bet that Brent can either send you a picture of what you are looking for or guide you to a...

Tim, Your measurements are the same as my '29 roadster pickup. I'm looking for the seat cushion and backrest, or a useable set or a set of springs but I'm not having any luck. Larry

Brent, I always look forward to reading your postings and they have been a great help. Thank you. After reading your response to gpits68 I looked at your website and the RPU restoration pictures. DEFINITELY OLD WORLD CRAFTSMANSHIP. I have a '29 RPU that came with a poorly fitting homemade seat...

I need the seat cushion and backrest for my '29 RPU. I would like to get a set in useable condition but will seriously consider a spring set if in good condition if reasonably priced. Thanks in advance, Lar.

Dudley, Thank you. A&L had the diagrams. Lar

A previous owner of my 1929 Roadster Pickup replaced the original body blocks with washers and 1/4" plywood. The resulst was misalignment of the doors and hood. I have many years experience as a cabinet maker and would like to make the blocks myself. I have searched the web but have not been...