Recent content by Kruzn40

If yiu can't find a local source then look no further than Henry Velasco at Velasco Crankshaft Service in Downey CA. 213-877-4212. There is none better than Henry.

You don't really know how good your insurance company and its coverage is until the unfortunate time comes when you need to deal with their claims department.

Newport Engineering makes excellent, easy to install electric wiper motors for old cars. Try them. They may have what you need.

If you're a AAA member, check into their agreed value classic car coverage. I have two vehicles insured with them. The rates are very reasonable and, most importantly, the claim service is excellent.

x2.

Most likely, the "idiots" shut down the auto shop class due to lack of interest on the part of the student body. In this day and age the kids know that they can do much better writing code for computer games and other software than they can getting their hands dirty working on automobiles.

Try a pair of race car drivers' shoes. They feel very light on the feet and the soles blend with the uppers and don't protrude out the sides like regular shoes. Summit Racing has a large selection. I wear a size 12 and they work for me........

The "political crowd" is trying to shut it down because they will be the first to be burned at the stake if they don't in the event that things go south. But with thousands mingling together with no PPE in the midst of a lethal pandemic, what on earth could go wrong?

That five year old gas left standing has turned to gum and varnish in your fuel system. You need to drain and flush it all out including disassembling the carb so that you can clean out the nozzles, jets, etc. Ask me how I know. When you say it acts like it's running out of gas, that is exactly...

I have all of my cars insured with AAA Auto Club, two DD's, and two ol' heaps on their classic coverage. The classic policy is very reasonably priced and the claims service is outstanding.

No scam. TEN Publishing is still in business and, according to what I have read on other sites, if you contact them and ask for a refund of the unused part of the subscription, they will cheerfully comply.

I've been buying stuff from C & G on and off for the best part of 30 years and have never, ever had an issue, and that's all the way back to when Clyde and Gail were running the show with Dorothy and Kyle assisting.

Do a leak-down test on each cylinder with compressed air. That will give you an idea of the path that your cylinder pressure is using to make its escape.

L & M stripped all of my sheet metal including the body in '86. Everything came out assembly-line clean with no warpage or any other potential damage from blasting. Keep in mind that if you do the chem dip, meticulous cleaning must be done afterwards to remove ALL of the residue or, in time...

Bored & Stroked has stated well the words of wisdom which you seek.