Recent content by Kevin in NZ

Thank you for that, much appreciated.

Thank you for your reply, If you can find it or remember where you read it I would love to find out how to do it.

Has anyone managed to fit a modern hi-capacity small 6v battery into the Script battery original case and using the original top covering the conversion so everything looks original. I have heard rumours that it is possible but nothing specific.

I have just seen a Model B carb that has been balanced for using an air cleaner, the difference with this one is all the modifications were internal and could not been seen. Unfortunately I never had time to get all the details of how it is done. Does anybody out there know how to do this...

I believe there is a modification to drill holes in the gear to reduce noise. Can any body help me with the details on what to do. I was told the article was in a Secrets of Speed magazine.

Thank you everone for your very helpfull replies. see below cut & paste from Mac's web site re washers, NOTE: It can only be used with a B-6051-M, B-6051-C or B-6051-S head gasket - you can not use a stock Model A head gasket. You will also need to use the A6066SHD high compression stud & nut...

Help... I have just fitted a A6010HC cylinder head (5.5comp ratio) with the recommended stud & nut set A6066SHD with recommended washers B6063. My problem is that approx only 1/3 of the stud is in the nut and with the washers removed only 1/2 to 3/4 of the thread is in the nut. It appears that...

Does anyone know anything about balancing carbs when using an air filter ? I am think of fitting a B carb and have been advised to balance the carb.:) Dous it work ?

Re: Any one knwo aobut kiwi Pins? Hi Brian, Yes Kiwi Pins is still in business and has the full range in stock. If you email me at kjstraw@xtra.co.nz I will send you an order form. Regards Kevin