Recent content by Judson

I hate to say it, but I am a little confused (temporary brain fade I hope) about what king pins to use, the 31 or the 32. I have a complete stock 32 front end that I have taken apart, cleaned, painted and put it back together and am going to put it under my 31 RPU with a Posies reversed eye...

Thanks to everyone for looking, the engine has been sold

I have a complete long block stock Model A engine (with inserts) and transmission for sale. Engine was built by H & H Flatheads in L.A. in 1992, has been covered in shop since. Never started, turned over by hand every year. Engine is complete and ready to install. Transmission and tower...

Thanks to everyone that responded to my issue from yesterday. I was ready to bite the bullet and pull the rear end and look at the pinion bearings as suggested by one member. But Chuck Kallas said before we start that, l want you to remove the speedometer gear housing behind the trans and see...

I really appreciate everyone's input, unfortunately, I will not be able to do any further work on the car until the end of April. When I find the problem, I will post for all to see. Thanks again for everyones help

I did grease the U Joint area and undid the speedo cable and I will check on the drums rubbing on the backing plate

Thanks Joe, no difference when I apply the brakes

I have a 1931 Roadster Pickup, all stock. Recently, I noticed a scraping noise which was intermittent which to me sounded like a dragging brake shoe. Then all of a sudden the scraping noise became continual beginning about 15 MPH. when the speed reduces to about 10 MPH, the sound goes away...