Recent content by jstrez5

IS their anyone out their who can work on a original 4 wire hot water heater motor from a 1940 ford heater? ONE other thing they say not to use the low switch that reverses the motor for use on the defrosters what is the reason for that if it is true . thank you JIM S

I am in need of an interior door trim piece for a 1939 Ford Standard Sedan. The piece I need is located on the front inside door: either left or right side. Some specifics on the piece: -Measure approximately 31-1/2" long -Held on with small nails that are welded onto the back of the trim piece...

I am in need of an interior door trim piece for a 1939 Ford Standard Sedan. The piece I need is located on the front inside door: either left or right side. Some specifics on the piece: -Measure approximately 31-1/2" long -Held on with small nails that are welded onto the back of the trim piece...

I found one thanks to all jim s.

I’m looking for a complete headlight socket assembly for a 1939 Ford Deluxe (original headlight bucket). If anyone has one available, knows a trusted vendor, or can point me to the right direction I’d really appreciate the help. Thanks in advance. Jim

Hi all, I’m looking for a 6V positive-ground LED headlight bulb that will fit the original socket and clear the stock headlight bucket on a 1939 Ford Deluxe. Has anyone found one that’s truly plug-and-play? If so, I’d appreciate the brand/part number and where you bought it. Fitment notes...

what are the 1940 hot water heaters going for very good condition new core 4 way switch slow fast foreword same with the defrosters tested no leaks any help would be greatly appreciated . thank you JIM

Bumppppp

Looking for a 39/40 ford hot water heater motor part number 91a-18527 it has 4 wires and is a 6 volt 2 speed reversible motor. Pm me thank you jim

received the 2 light green hot water heater door knob today and also the defroster knob from DENNIS CARPENTER . thank you all JIM S.

looking for 2 light green doorknobs on the 40 ford hot water heater and also the hot water heater defroster knob. P M thank you jim

ON a original 39- 40 ford hot water heater switch 5 position switch if the switch is missing the wire resistors on the back of the switch can it be repaired with new resistors if so anyone know of someone who can do the job. thank you JIM

i want to thank TOM for helping me out with the 4 clips i needed 4 my hot water heater thanks again. JIM

in need of the clips that hold on the 2 vertical stainless strips on each side of the louvers on a 1940 ford hot water heater i need 4 clips i searched on line no luck if you can spare 4 of them i would appreciate it and buy them from you . thank you. jim pm me

How many red stripes are on the 40 ford hot water heater for sure 2 or 3 thank you jim