Recent content by JD

  1. J

    1934 pickup stock floor/toe board/trans cover

    I notice there doesn't seem to be a reply to this question. Did you get it sorted? If not, I can take a photo of the steel trans cover for you.
  2. J

    1934 pickup instrument light bracket

    Thanks for the helpful advice - I was able to locate the correct position. And sorry, I thought I had replied to acknowledge this ages ago.
  3. J

    1934 pickup instrument light bracket

    Thank-you. Should I be looking on the firewall, as opposed to the cowl?
  4. J

    1934 pickup instrument light bracket

    I have an instrument light bracket for my 1934 pickup I have cleaned and painted but I can't see where it mounts. Can anyone advise please?
  5. J

    1937 pickup window regulator

    Thank-you, I have passed the answers on to Pat.
  6. J

    1937 pickup window regulator

    From Pat, to try and clarify this issue: " let’s imagine we are fitting a new handle crank , which entails drilling off the heads of the 3 rivets. When I took the housing off holding the crank the two springs unwound and the arms ended up where you see them now (photos show before and after...
  7. J

    1934 Pickup dash

    Charlie's Dad's truck looks great!
  8. J

    1937 pickup window regulator

    Photo attached
  9. J

    1937 pickup window regulator

    More detail: So ,this is the regulator , and the small crank box on the left is the device that locks the spring tension. At the moment , the two arms at the top are in a relaxed mode , so , there is no tension, if you then pull the arms outward and around in a circle , that’s when the tension...
  10. J

    1937 pickup window regulator

    He says he drilled off the three rivets that hold the small housing for the handle crank, this allowed the spring tension to unwind, now he wants to reassemble , but doesn’t know how to reset the tension.
  11. J

    1937 pickup window regulator

    A friend is struggling to set the spring tension on his window regulator (1937 pickup). Any advice for him? I can ask him for more specific questions if required. John
  12. J

    New 32

    Looks like it will be a very driveable truck. Amazing achievement in 18 months from the photo you posted.
  13. J

    1934 pickup

    That is interesting as the transmission cover plate in my 34 pickup also has no holes drilled in it for screws.
  14. J

    1934 pickup leaking fuel from filler neck

    I ran a metal ruler / straight edge over the surface of the neck where the cap sits. It appears to be dead level.
  15. J

    1934 pickup leaking fuel from filler neck

    Sorry I missed your reply; yes i will try the tape. I have also been wondering about the possibility of a broken baffle? John
See more
Back
Top