Recent content by JayChicago

I think you did the right thing. Ford designed those distributors to be easily removed from the engine and timing set on a specialized machine that every dealer had. There are no timing marks on the engine. I never attempted to work on the distributor myself, would never get the timing right.

Did this a few years ago on a '37 Tudor. As I recall, the regulator was able to easily fit into the wall panel through the larger opening. Then it attaches to the inner wall panel with four bolts & star lock washers. (a reproduction fastener package was available when I did this) The glass needs...

X 2. Thank you, Ryan.

Yes, very hot very quickly, is normal.

Hah! Good reply. :)

Yes, change is unpleasant, especially for us old guys. But we can do it. Thanks for the heads-up advance notice.

I have no experience with this so will let others give advice. I'm just sticking my nose in here to ask why so many feel it necessary to go to an alternator? I could drive all night in city traffic without depleting the battery, with the stock 6 volt generator. If the generator is good, voltage...

Btt

Btt

Btt

Btt

Btt

Agree, 1.5 ohm or 2.0 ohm resistor. That little coil on the distributor is about 1 ohm in itself. You will then have about 3 ohm total in the circuit, about right to get 4 amps when being pushed by 12 volts. Yes, coil does care about polarity. Feed negative to the coil. Ground the block to...

X 2 Sometimes bigger is too big.

x 2