Recent content by Jason M.

I just had custom hoses built to spec at Gregg Distributors Hydraulic Shop, they where built, pressure tested and in my hand within an hour and the quality 10X that of any of the aftermarket hoses I’d been trying which where all too long or too short. https://greggdistributors.ca/hose-shop

Looks great, Congratulations!!!

Thank You VERY much!!!

Just ordering some parts for my 59A and would like a suggestion of how much bulk ignition lead wire to purchase for a stock configuration system including the coil to distributor? I have the factory tin wire looms. Thank You

I have mine apart currently and just ordered the neoprene gasket after reading this thread. Thank You

After reading around quite a bit I decided to purchase thermostats for my 59A. As I was ordering some parts from a reputable online flathead shop and 180 thermostats where on the menu I ordered a set instead of taking the PN to my local auto supply. Received the parts yesterday and these...

Just for purposes of posterity here is a photo of a small nut tig welded to the original column drop bolt to remove the bolt.

May I ask if anyone is aware of the Dan Brusgard "Needle Bearing" steering column mast jacket kits are still available? I've tried contacting him via email twice now and cannot seem to locate the kit on ebay? I'd buy a kit anywhere if it where available. Thank You

Looking for a photo of the short little stanchion style clip (3" tall) that attaches to an intake manifold bolt and then supports the vacuum tube on its way from the carburetor to distributor. Perhaps this was used only on the 69A engine? I've misplaced mine and would like to locate...

Is it possible to use crankshaft/flywheel dowel pins?

That is really good news. Thank You Phil

Simple question, Do the two oil baffles on the input and main shafts float or are they fixed once the universal joint is snug? I have a gennie universal joint that I rebuilt with the Van Pelt kit and a stock "cupped" washer in place (not the Van Pelt washer) everything still spins nice and...

I'm looking for eight nice NOS or nice used ORIGINAL style radiator clamps for my 59A flathead, I have currently have reproduction clamps and they don't float my boat. Shipped to WA 98230

I'm somewhat desperate for a very nice pair of these clips for my 35 or 36 headlights, parts will ship to WA... Thank You

I'm looking for an old chrome dash rail cover for my 28/29 rpu. Thx