Recent content by Fullraceflathead

Congratulations!!!

Proof nobody reads the entire thread before they comment

I realize all the hard work and labor but it still remains what excellent results you're making in such a beautiful engine at this point!!!

The 3M brand adhesives are definitely worth their extra expense they actually use them on some car models to hold the Doors and fender panels and trim pieces.

Re: Modified A will not Calihute It does sound like a fuel starvation problem to me if you keep your ' in it long enough it'll probably start popping back through the carburetors from being lean I would check your fuel flow Obviously you have enough fuel flow for the lower RPM ranges But it...

You wanna make sure you loosen the front body mounts before you try to spread the frame too!!!

I've used a small hydraulic bottle jack and a 2 by 4 I was surprised the bottle jack would work sideways but it did.

No, you should be able to unscrew the cable 1 or 2 turns with the distributor in place.

Silicone spray works very well when you need to lube a rubber bushing or the model A. rubber wishbone ball too!!!

That minor amount of grinding wouldn't hurt anything in my opinion I would use it!!!

Thank you for taking the time to take the pictures and make the videos!!!

The Burt's flywheel in the photo looks to be very lightweight does anybody happen to know what the weight is?

I agree 100% it's in our best interest to not let the old man in!!!

Glad to see somebody your age interested And it looks like your children will be also On another note middle age believe it or not Is in your late 30s the average lifespan today for a male is 76-77 years of age. I myself am 63.

That looks like a pretty good deal to me!!!