Recent content by fourthirty

Help with rear brakes. I have the front brakes done including cast iron drums and Flathead Ted floaters. The top of the rears are done, however, I can't make any sense of the instructions to do the lower drums. I have the Deluxe kit. Is there a good video or can someone help with a picture or...

I am working on a chassis that will carry a 1930 Model 255A Natural Wood Special Delivery. I have a set of 3:54 gears to replace the stock 3:78's. The engine is done and it has a Burlington crank and 5.5 head. Will the hope of an extra 5 mph top end be offset by the 2500 plus lbs. of the wood...

I am considering putting 3:54 gears in a chassis that will carry a 255A natural wood Special Delivery. I would like to hear from guys that have experience with this gear ratio. The 255A will tip the scales a little north of 2550 lbs. The engine is already built as a touring with Burlington...

I have a new in the box AL windshield frame that was included in the spare parts with my AA Dually purchase The original windshield frame is rusty. Do the AL frames fit and do I need to use zinc chromate primer? Thanks, Tom

Tim, thanks for including a picture of our Dixieland Pick-Up Band AA from Minnesota. The non-car-guy members of the band were very impressed with the Musuem. We were honored to be a part of this wonderful event. Tom Owens

I would like to purchase them. I have not purchased on the forum before. I 'll need your help. zip is 55117 email dixiecoupe@aol.com Tom

I have a '30 rolling chassis that will become a 255-A when my (honey do list) is shorter. There are 3 dimples in the rail just behind the rear motor mount(on both sides). Are these the position marks for the side mounts? The chassis is from a tudor with a rear mount! Thanks, Fourthirty

I have a late '30 rolling chassis that will become a 255-A when my "honey do list" is shorter. There are 3 dimples in the frame just behind the rear motor mount (on each side). Is this the position marks for the side mount holes? fourthirty