Recent content by fordy400

  1. fordy400

    40 Ford windnoise

    I know it is not proper but I installed two GM air vents in the back of the cab in my 40 Pickup and with windows up and cowl vent open you can carry on a conversation at 65 MPH
  2. fordy400

    Chemical Dip Needed

    I think there is a place near Sacramento Vintage...you might give them a call and inquire.
  3. fordy400

    1953 Ford polarity

    53 Ford is positive ground
  4. fordy400

    40 Ford pick up drum to drum width

    Wheel mounting surface?
  5. fordy400

    radiator pan

    Looks like a 42 Ford Part No.16550 per the 1941-48 Ford book. Dave in Santa Rosa, CA
  6. fordy400

    Steering Arm Differences??

    The difference is the direction of the taper for the tie rod end. In other words, one tapers from the bottom up, the other tapers from the bottom down.
  7. fordy400

    39 trans /clutch throw out arm

    Hi Andy, I would appreciate a picture/dims of the 39 arm. Thanks, Dave fordy400@aol.com
  8. fordy400

    V8 60 Brackets

    Pair of Brackets, radiator & engine support. Part nos. 74-5057 RH and 74-5058 LH. Used on 60hp 37-39 Fords. These mount over the original 85hp holes in the front crossmember. $40 / pair plus shipping. Dave (707)539-9414
  9. fordy400

    V860 Brackets

    Pair of Brackets, radiator & engine support. Part nos. 74-5057 RH and 74-5058 LH. Used on 60 hp 37-39 Fords. These mount over the original 85hp holes in the front crossmember. $40 /pair plus shipping. Dave in Santa Rosa, CA (707)539-9414
  10. fordy400

    Radiator

    Core is 3" thick, 21" wide, 22 1/2" tall, overall ht from top of cap to bottom of lwr tank is 30", mounting brkts are 5 1/2" from bottom of lwr tank.
  11. fordy400

    40 Ford Pickup Hood

    Hood looks good, the threads in the mounting points are good. Dave (707) 539-9414 Hood is sold!
  12. fordy400

    Radiator

    Radiator is an O1T for a 40-41 Ford big truck. Looks to be sound and in good condition. Dave (707) 539-9414
  13. fordy400

    fordy400

    Model A Rear axle assy (2 available) one is all stock with wishbones, spring and rear brakes with drums. second one is modified with hydraulic brakes, includes backing plates and drums but no spring or wishbones. Give Dave a call at (707)549-9414 Thanks
  14. fordy400

    Pickup truck bed rail lights

    I bought mine from RB's Obsolete www.rbsauto.com They worked well in my 40 Pickup and had both tail light and brake light features. Dave
  15. fordy400

    Model A Chassis

    Model A chassis with 16" wire wheels (35 Ford) tires are shot but hold air / OK for rollers. Call if you have questions. Thanks, Dave in Santa Rosa, CA (707)539-9414
See more
Back
Top