Recent content by Fordman487

I have a 91T-2140 master brake cylinder and need a replacement cap. Can anyone suggest a source? Although ford lists the 91A-2162 as a replacement, that cap is 1/4" too large. I'm not sure if my master cylinder is a knock off with different dimensions or there were different specs. If i...

I am looking to purchase a cast iron intake manifold from the late 1930's. If you have one for sale, please PM me with picture. Thank you!

I have a stock 1936 engine and need to replace the condenser and coil. It's a 6 volt ground positive system with a remote coil unit. The coil says 505 and the condenser has no markings on it. Can anyone recommend a quality replacement coil and condenser? Looking for links, part numbers or brand...

I have a '35 truck; if the car and truck are the same, the lever in the center of the steering wheel is attached by a rod to the actual switch which is mounted at the base of the steering column. It would not be uncommon for something to be loose in that switch or being pulled by the turning...

Hi All, When adjusting the shoe position on early 1940 Ford hydraulic brakes, do you let the shoes drag a little, or back the shoes off until no drag can be heard or felt? What are people using as a best practice?

Hi gang- I need some help- I’ve got a ‘36LB engine with what I believe ( but am not certain) is a truck oil pan. The motor / oil pan are in a heavy duty truck and the oil pan has a removable rear piece to service the clutch if needed. I drained the oil and put in 4 quarts. The 8RT dip stick...

Hi Everyone- What are people using for brake spring pliers? I’ve got a 1940 heavy duty ford truck and need advice on what tools people are using to remove and replace the brake springs. The cheap pliers from autozone aren’t working bc the angle isn’t right. What suppliers do the Ford Barn Folks...

Looking for a few left handed (reverse) threaded wheel studs for the front wheel of a 1939 1.5 ton truck. If anyone knows where some may be available please post or PM me. Thank you!

I have malfunctioning wheel brake cylinders on my 1939 heavy duty 1.5ton truck. Any suggestions of who can rebuild these or where i can find American made replacements? . I'm looking for quality parts and craftsmanship. Please post or PM me. Thanks!

I have a green corrosion-like substance starting to appear on the OUTSIDE of my brass/copper radiator. Someone suggested this is a result of the manufacturing process chemicals and oxidation. What is this and what's the best way to clean this off,...vinegar, simple green, paint over it?

I'm looking for a fuel tank for a Ford 1935 1.5 ton commercial truck. This is the style that goes under the front seat and the filler neck does NOT protrude through the body. Thank you!

I’m thinking about switching from a 16 inch mechanical fan to a 17” or 18” mechanical fan on my ‘35 Ford commercial truck for improved air flow and cooling. What are the pro’s and con’s,... any advice, thoughts or opinions?

Wanted: 1935 Ford truck radiator. This is a 1.5 ton heavy duty commercial truck style radiator. Please respond if you've got one or know where I can find one. Will pick up or pay for shipping. Thanks!!!!

I’m looking to convert my 2 dash gauge lightbulbs to LED for more light on my ‘35 ford. This will be my first time with a conversion. Has anyone switched a T63 bulb to LED? Any suggestions on a suitable LED alternative? I’ve got a stock 6v ground positive system with a dimmer. Anything to watch...

Hi Gang, Can anyone suggest a repair company or supplier for a bent and damaged chrome front truck bumper from a '35 1 1/2 ton? Would need to purchase new or have restored. Part Number21T-177757-A.