Recent content by firechief5215

Thank you for replies , I will give them a try if anyone else has information please post thank you

My dad gave my 14yo son his 1949 ford 2 door car. My daughter's softball team came over and practiced in our shop. They broke his passenger side rear vent window where can i get the parts to put this car back as close to original as possible including the etching, please help with part numbers...

Does any one have any suggestion's on a small touch up spray gun, I finally got the worm drive rear in our AA' came out very nice , I had the rear painted before install but we scratched it up in a few places and the truck frame also needs a little touch up also. We used a base coat clear coat...

Thank you I will give this a try and see what happens

We have a Spartan horn , It will not turn or at least you have to help it. I pushed the horn button ,I took a wood dowel and help it get started and it went about 8 or 10 revolution's and stopped. I have read the threads about spraying it and checking ground witch I did even oiled it and no...

Does anyone know what the correct length would be

Is the A-3616-AR the correct one for me.From what I have read on here it should be 46-3/4” overall length But where does overall length measure from. If so does anyone have the dimension Thank You Billy

Would the 45 3/4 also fit the switch I have pictured without the bail. it appears to be to short or maybe I have something else wrong Does anyone have a break down picture of the switch Maybe I missing a part, and also thank you for your reply

I am putting the Original light switch setup on our truck , I am going to try to lengthen the Horn/Light switch rod , I need to know what length to make it and where to measure from. Also the picture below is one I found on line but mine is just like this Thank You Billy

Does anyone know where Fred Morse went. I bought some parts last year and I have his number and its no longer in service and not answering emails. I see he is no longer on here but didn't no if someone was close to him. He took care of us with the multi disc setup and transmission in our fire...

I have 4 pictures of our light switch that came off our early 28 (FEBURARY) fire truck, Some time ago this setup was taking off and they rigged up a different setup. I have been able to come up with these parts but I am not sure if I am missing anything . I have the original doomed cap also that...

I posted earlier about my early 28 (LATE FEBURARY} ford horn, I'm pretty sure the horn is shorted out because it is causing the negative connector to also become hot , Is there someone that sells the original horns or if not the best supplier of a new one. Rather have a original though. I...

What I don't understand is if I hook both wires as shown under there tabs doesn't that cause the wire going to the light switch become hot, It appears that the bar that brass holder that holds both wires on the horn is all 1 piece

I am reinstalling my Horn. I wired it as I read as shown below. The problem I am having when I install the 2 wires ,1 wire on each tab the wire the goes to the light switch is hot and horn is stuck on

Does anyone else use the Multi disc set up