Recent content by elfox

I had roughly the same problem. I used the 50/50 mix of ATF and acetone as well. be sure to get some on the valve seats, and into the piston when you put it down the spark plug hole. I let mine sit for a few days, then lifted *one* rear tire off the ground, put the ****** in 3rd, made sure...

Hey all - I just bought a high-speed rear diff for my '29 AA, and the input (Male) spline is badly worn. Does anyone know of any business that has successfully repaired splines? - Thanks, Elfox

I am looking for a complete set of u-bolts (bolts, nuts, brackets) that hold the bed of a flatbed to the truck frame. Please send me an email at elfox@rap.midco.net if you have some you are willing to sell. - Elfox

I am looking for a set of spring perches for my '29 AA truck that are in decent shape. Please send me an email at elfox@rap.midco.net if you have one or two you are willing to part with. Thanks in advance! -Elfox

I had the same problem. I called Bert's in Denver, and they had an original 15" tube in stock. Might want to give them a call. 1-800-321-1931

I recently purchased a B13466 light bulb for the instrument panel in my '29 AA truck, but it doesn't fit. Is that the correct part# bulb to use? The base is too small for the socket. The instrument panel is original (as far as I know). Thanks in advance!

I need a '28-'31 front right (passenger) side brake actuator shaft - the one that goes between the spring perch and the king pin. Do you have one, and if so, for how much and what shape is it in?

I need a '28-'31 front right (passenger) side brake actuating shaft - the one that goes between the spring perch and the king pin. Do you have one, and if so, for how much and what shape is it in?

I am looking for a '28-'31 front right (passenger) side brake actuating shaft - the one the goes between the spring perch and the king pin. Do you have one?

How does the inside of the gas tank look? Rust, no rust? Any dents/fillers/ etc?

Thanks Rusty - I used a mirror this time to look in the tank, and could see what was left of my baffles. Not pretty. Time to look for a new tank... Any more suggestions for tank suppliers other than Bert's?

I am very new to the restoration process, so any advice would be immensely appreciated. I was raised on the farm many years ago, and have always admired the earlier Ford trucks. I bought a '29 AA truck a couple weeks ago, and the gas tank is in pretty rough shape. It doesn't leak, and the...