Recent content by Dougs 28

A 1955 ford thunderbird and a 1977 Z-28 Camaro……

Now that’s AMERICA, you have to love it… GOD BLESS AMERICA….!

Enjoy his videos. God bless him and his family and may he Rest In Peace…….

Try summit racing equipment. I have the Mallory distributor also, single point and I get the points, condenser, and rotors from them.

I will also miss his posts, I always looked forward to them. Very informative. God Bless his family and my you Rest In Peace.

Use a short length of garden hose and tape it to the end of you’re shop vac hose so it transfers the suction to the short garden hose, after taking the starter out, shove the hose into the flywheel housing and you should be able to suck the bolt out.

May God bless you and you’re family through these troubling times…

From a previous post from the thread ( just wondering what’s the year of you’re birth) Purdy said his birthdate was November of 1946

I also want to wish everyone a happy Thanksgiving and have a blessed Day…!

Okay, this afternoon I took the plugs out and turned the motor over with the starter, and there wasn’t a tick, so I’m thinking it must have been a exhaust leak. This weekend I’ll pull the distributor and clean the crud out and put everything back together, using a new copper exhaust gasket and...

Thanks for the replies. I was down with COVID and the car sat for a little over a month. The ticking began on that first start up/drive. I haven’t driven it since-about 3 weeks. I’ve had two different exhaust leaks in the past and this one doesn’t sound the same. I have used a stethoscope and it...

Have a fairly loud ticking noise in the 28, so I did a compression test and all four cylinders are pretty consistent at around 70. So I changed the exhaust manifold gasket thinking it might be an exhaust leak on the # 4 exhaust port making the tick. Put it all back together and the ticking was...

Bergs, can’t go wrong, simply the best..!

Have you ever tried using a clay bar? Meguires has a kit for about $20 with everything you need in it. I start with the clay bar then follow it up with Meguires Carnuba Paste-not liquid. It comes out like glass. My wife does this same process with her own car then follows it up with Meguires...

Buy a Bergs radiator, they work great..!