Recent content by Doug Money

Try GoJo with Pumice to clean the white walls. I use it on my boat trim and whitewall tires. it works great.

Here is the video. http://www.youtube.com/watch?v=UKZ7WrfHdf8

Ask and Ye shall receive. Here is the plan to the press. Good Luck. http://www.funprojects.com/pdf/WheelpressA2.pdf

If you are starting on battery, there will be buzz with the spark lever up if the cylinder is in position to fire. Moving the spark lever down is not the correct way to start. The car should be started on battery with the lever all of the way up. It is easy to get a kickback and break an arm...

I use Windows and it is one click of the mouse to resize. One more click to confirm. Everybody makes it hard trying to reinvent the wheel like some of the Model T modifications.

Sometimes the ratios are exaggerated. Look back through the posts of last year on the subject. Also at the MTFCA.

http://www.mtfca.com/discus/messages/257047/309992.html?1346930391 http://www.mtfca.com/discus/messages/29/44446.html?1199751008 Hope this helps.

Looks like Magneto magnet

Tom Carnegie I think was the one who mentioned using Never-Seez as paint on the exhaust manifold. After it is heated from the running engine it sets and looks like bare metal. I have it around the nut when I put the new manifold on and it looks good there.

Put a voltmeter in and be done. Also, 15max, the Alternator puts out DC current as well as the generator. Good Luck.

I use over the counter Kilz brand spray paint only because it was the shade of green I wanted. It works fine and even on the head looks good. It's been on two engines now for 7 years and never had a problem with it.

I have never done one before and my fordor has no padding. Here are some links to previous posts about it. http://www.mtfca.com/discus/messages/80257/104066.html http://www.mtfca.com/discus/messages/118802/122853.html?1264902531...

Make sure your distributor body is grounded to the battery well and the moveable plate that the points mount to has a good ground to the body of the distributor also.

I'd use Joe Bell over in Tiffin OH. Great work, great guy and it's done right, the way it should be by the one who's name is above the door.

Yes, so after the first 5 miles the battery should be recharged so you really don't need anymore after that. If you don't drive much at night but do occasionally, then a discharge with the lights on shouldn't matter much as long as there is a slight charge without the lights on. YMMV.