Recent content by dlshady

FWIW, I used one of the Leonard Nettles oil pumps in the Burtz that I just finished and it's flawless. One thing to note is that when installing the oil filter setup (also from Mr. Nettles), the 1/4" bar stock plug I made to prevent oil from flowing directly from the pump into the main oil...

I just finished assembling one for a customer and what I did was to use the larger O-rings which were spec'd out in the earlier builder's guide that seal on the smaller diameter of the stud, as you mentioned. I wiped a ring of RTV around the smaller diameter, inserted the stud and then took a...

Looking forward to watching this one when I get home tonight!

Thank you! I'll dig that one out tonight and read the article.

Marshall, do you recall what issue that article was in?

Steve, have you done any articles on the identification of the various casting revisions similar to your carburetor articles? I finally managed to track down copies of the different issues of The Restorer containing your carburetor articles (thanks eBay!) and have thoroughly enjoyed studying...

Bump

Bump

Bump

Bump

Bump

Bump

Bump

Bump

I put on in a 29 Sport Coupe for a fellow several years ago, and the only modification I recall having to do was drill the extra hole. It's been a long time so I may be forgetting, but I don't recall having to make a spacer.