Recent content by Dkrahn

  1. D

    Can Rod Babbitts be ordered

    Sounds good, thank you.
  2. D

    Can Rod Babbitts be ordered

    So, I put a 5.5 head on my stock 1929 Model A 4 banger. Then I started to get some knocking - ok, I see people shaking their head yep. I assume the bottom end could not handle the higher compression. Correct me if I am wrong. But if that is the case, can I order a set of babbitts, or do they...
  3. D

    Physical difference in 4.5, 5.0 and 5.5:1 heads

    Yes, that is the one I say before - Thank you much
  4. D

    Physical difference in 4.5, 5.0 and 5.5:1 heads

    I have multiple Model A heads in my garage. I can't remember which are good and which are not. Does anyone have a link or pictures of what the 4.5, 5, 5.5 and 6:1 heads look like. I once seen a picture that shows the physical differences, but have lost it. Appreciate it Dean
  5. D

    Deep knocking sound

    OK, when I retarded the timing the knock lessened. I pulled the copper connectors on each plug and no difference. Sounds like I need to drain the oil, pull the pan and look at and "adjusting the main bearing". This will be a new experience. And one I am hoping to only do once.
  6. D

    Deep knocking sound

    Yes, I am trying to isolate the issue, and appreciate all the feedback. It isn't the generator hitting anything.
  7. D

    Deep knocking sound

    I like that idea.will let you know results
  8. D

    Deep knocking sound

    Is this something new since the head was replaced? Have you driven it yet? With the higher compression heads they tend to knock much easier. Try to purposely set the timing retarded a bit more and give it a try to see if the noise goes away. Do you have full travel of the advance lever in...
  9. D

    Deep knocking sound

    I will head down that road and keep you posted. Thank you much
  10. D

    Deep knocking sound

    Yes
  11. D

    Deep knocking sound

    So I cracked the head and replaced it with a 6:1 head. Now I have a deep loud knock as I start it and when it is idling, and then hit throttle. What do y'all think it is, and what kind of test do I need to do to confirm what the issue is?
  12. D

    5.5 high compression head

    With the standard head on my '29 pickup I had autolite 3076 spark plugs. Should I move to different plugs with HC head?
  13. D

    Model a points block

    yes you are right. I need to lock the points down from wandering
  14. D

    Model a points block

    Can someone provide me the size of screw, or set screw that is used on the original distributor point block, to hold the adjustment in place for the points gap.
  15. D

    Original Style Distributor

    J Franklin, I entirely hope so and feel pretty confident that I have.
Back
Top