Recent content by deuce5wndw

Thanks Pete you're handy to have around!

I have a 11A-3306-B drag link and the green book says bent design for 1941 passenger and pickup but not the application. Did the oil pan for a 4 cylinder require more clearance? The green book also says 11Y-3306-A fits 35-41 pass and commercial. Would this be good to use when you have oil pan...

I like it!!

When you take the head off check it close and the gasket. Sounds like maybe you are getting compression leaking into the cooling system on that side.

I have the turn type ashtray. Thank you everyone for all your help!

Good afternoon, guys. I'm working on the dash of my 35 roadster and some previous owner hogged out the ashtray hole to put a tachometer in. I have the correct ashtray I want to install. Does the hole have the step like a 36 closed car? If so, I will be on the hunt for a closed car junk dash to...

I talked to a pro body guy at Carlisle that does outstanding work and he doesn't sand and buff clear coat for thirty days. He tells the customer to bring it back for the buffing. He said that if you cut and buff immediately after painting you seal the unevaporated thinners in the paint with the...

I had the same problem on a 40 coupe I bought even the window glass was sprayed with red oxide primer. I used a good quality lacquer thinner and rags to wash it off. It was a success. I used rubber gloves but the thinner would eat them up. Like to have never got my fingernails clean!

KBS motor coater is the best I have ever used but I didn't find your color on the website.

still have them

3 window is different but the others are the same.

Thanks Pete!

top

Anybody going? I'm in the Broadbent arena far corner. stop by for a visit.

Be sure to stop by my spaces at the AACA swap meet this weekend! Some of what I will be taking: 1939-40 Bob Drake runningboards in the original box, McCulloch flathead supercharger, Canadian 59AB aluminum heads, 35-36 rear radius rods, 35-36 wishbone, 39 dash, 2 piece oil pan 59AB, late 8ba to...