Recent content by Deny1950

bobv ordered one yesterday from shnyders hope this one works thanks

nkaminar what did you use for the resister

i had got one from Mike affordable parts was supposed to work on led but doesn't and the other was from amazon also said it was for led but no go. i know someone makes on but can't seem to get the right info.. someone must be using one on there a without all the extra wireing involved??

Connecticut mike yes that's the one i wanted but they wanted 32 bucks for shipping ?????go figure

hi i am trying to find a flasher that will work for my 6v positive ground and led lights . Can't seem to find one in Canada but have found some in the USA but they dont ship here. I had two ordered from different sights but they don't work. Could someone tell me what actually works and where to...

thanks guys that is better millage than i thought

hi was woundering how many gallons dose a 1930 a coupe hold and also what are you guys getting for gas mileage ? Thanks Denis

you never have to many grounds. I ran battery to frame, then frame to body and engine in two spots for all of them

Bob from Northport on my 1930 a coupe they were small rivets, drilled and punched out,also had grill off

Hi what kind of oil do you all use for the motor and where do you get it? thanks Denis

hi guys more info needed . when the sunvisor is set in place and under the roof on the sides, how is that sealed up after so water wont get in? this is on a 1930 a coupe. Thanks Denis

TMarsh sorry about that it's 1930 model a coup as in picture

shew01 it comes in cartrige form. simply remove both ends and insert in gun

Hi guys question for y'all. How far dose the welting go on the front of the rear fender? Dose it go all the way to the running board? or only to the splash apron above the running board. Thanks Denis

thanks guys for all the help but just to let you know got every thing working correctly. I used all oem parts they were all good. finaly figured out why my lights were all on nomater where the switch was. Had to fill down the connections on the wires at the headlight bucket. They were to big and...