Recent content by DanF

Thank you Stretch Cab. Here it is at its worst! https://drive.google.com/file/d/137P0qLpprKBcR_JMo8tHN9xRNWWvt53s/view?usp=sharing

https://drive.google.com/file/d/1xSwOOlJOOV3BlG_S1uwQR35FNW1B6y-7/view?usp=sharing

It looked ok in this picture but I had a donor sedan to help revive it. The story I got from the pervious owner was he bought it in Eastern PA. He had it for a few years then I bought it from him in the Baltimore area...

Large concrete mixing tub from box home store. https://www.homedepot.com/p/Plasgad-Black-Large-Concrete-Mixing-Tub-887102C/205451585 They also work really good as oil catch pans when breaking down an engine on an engine stand.

You can't send PM under 10 posts as well...

If you have drawing files there is laser cutting service online Sendcutsend.com. I used the service a few times and I was happy with the results.

Why not?!

I bought a used pickup that reeked to high heaven last year. After trying everything to mask the smell with cleaners that didn't work, I bought an Enerzen high capacity commercial ozone generator. Stuck that in the truck and let it run several cycles and it no longer stinks.

Also, I need info/pictures on the plywood behind the rear seat that makes up the convertible top well. Thanks again.

Hi guys, I need some help. My convertible was in rough shape when I bought it. It was missing the rocker boxes, typical Northeastern rust bucket. Now that I have the rust sorted out, I need a measurement to locate the clevis that mount the power top jackscrews to the top of the rocker box...

I am looking for rear quarter body side moldings for a 1941 ford coupe/convertible.

I am looking for a right front fender bottom for a late 41, one piece will consider early 2 peice bottom, used good condition or nos preferred. Thank you in advance for any leads.

I am looking for a decent set of rear 1/4 moldings for 41 Ford sedan coupe (long door). Any leads are appreciated.