Recent content by ct50f1

7HT carburetor for 226 CI Six. Threads at gas inlet are stripped so they will need to be repaired or a new upper body substituted. $20 plus shipping - should fit in small USPS one rate box ~ $9.

BTT - price reduced.

Hard to find exhaust manifold for H Series 226 engine. Casting in good shape, heat riser needs restoration. $85, plus shipping.

Matched set of 4 original Kelsey Hayes wheels for Ford F-1, size 16 x 4 1/2 in very good condition. Local pickup only or can deliver within 50 miles.

226 Exhaust Exhaust manifold for H Series

Need 7HT Carburetor for '50 F-1 226 ci, six cylinder. Parts carb OK if upper body is in good condition, especially fuel inlet threads. Can't figure out how to delete this ad but I no longer need the carb.

Btt

Looking for counterweight for Ford F1 226 Six Cylinder Heat Riser.

Posting for a friend: 1929 Ford 4 Door Phaeton - Imported from Brazil in 1977. Older restoration, including professionally rebuilt engine. Runs well, less than !,000 miles since restoration. Stored indoors under fitted tarp. $18,000 or best reasonable offer. Contact Bob (860) 633-4938 or...

Looking for stock rear bumper and brackets for '50 F-1. Prefer local or somewhere in northeast to avoid shipping charges.

Looking for two 16" x 4.5" Kelsey-Hayes wheels for F-1. The Ford part number was 8C-1015 and K-H number was 31283. The wheels have a 5 lug x 5.5" bolt pattern, and have what's called an "R" wheel center. The "R" center has hub cap nubs molded into the steel on the inner edge of the wheel center...

Looking for carburetor for 226 six cylinder - Model 7HT. Important that the threads for the gas and vacuum connections are good. Threads were ruined in the one I have by previous owner.

Looking for a 6 volt standard horn that mounts next to the radiator (not trumpet style, under hood mount) for my 1950 F-1. Condition of horn bell not important as long as the motor is working.

Need spring for door latch mechanism for '50 F-1 passenger side door that applies pressure to the end operating the interior door handle. Will purchase entire mechanism, if necessary.

Looking for vent window frame for '50 F-1 with good pivot post and spring. I don't need the window and it's Ok if frame is not usable as long as the pivot post can be salvaged and is in good shape.