Recent content by cr1248

Re: No Spark - NEED HELP! UPDATE If you have an inline fuse, you may want to replace it….checking voltage with a meter or a test light doesn’t pull enough current and you may get faulty readings of power and voltage. I fixed one of my friends the other day that had similar symptoms since the...

This is a short video that I made when we used to go to the schools to show how things worked in the olden years…an old Maytag that I restored… https://youtube.com/watch?v=7X4QnBnjB4k&si=TO86yEmf8fpbC_c6

A friend of mine who is no longer with us did these for me of two of my cars a few years ago…wood intarsia….a lot of handiwork….

I’ll agree that most of the people are correct in removing the tank and having it cleaned properly but I have had some success in adding the cleaner of you choice and putting the car on a trailer and driving it around town especially around turns and then draining and redoing until the majority...

I’ve been using these for years on all my Model A,s and not a drop gets past this valve…others will say that it’s a bandaid but it definitely works for me. I get mine from Ace Hardware….

I built mine out of wood and coated with exterior polyurethane. It has held up great. Built one for my truck as well. Holds lots of tools and other stuff….

Personally, I like the whitewalls myself and over the years I have had all types of Model As in many different configurations and like the different combos. Bottom line it’s what “you” like as an individual….

If you’re into a little woodworking, I made these for my cars, a truck and a phaeton…also, I made a little epilept for both sides of the dash on the truck. Looks pretty good and dresses it up a bit….

I have a homemade Model A Trailer that I built for my Model A Truck. It has been used very little and it’s just taking up space in my garage. It has new black wall tires, Model A tail lamps and is in great overall condition. The wheels are Model A wheels but the fenders are not. The...

If you have another spare distributor top cap, make a troubleshooting tool by cutting off both sides of it leaving the part intact where the coil wire goes in and snaps onto the distributor. Snap it back on the distributor and turn the engine over and you will be able to see inside if you have...

Over the years I’ve had a good bit of trouble with condensers so I built Tom Wesenbergs coil tester and added the condensers and spark plug test as well.

This 1929 Ford Model A Tudor is in excellent condition. It has a newly rebuilt engine with less than 1000 miles on it. The body and paint and interior are in excellent condition as well. It starts, runs and drives really well. Tires and brakes are new and all accessories function normally. If...

Here is a pick of the one that I made. It works well for two large cups.

These are two of the trailers that I built and they pull fine behind either of my Model A’s.

I’ve had so many problems with shutoff valves throughout the years that I added another one by the carb.