Recent content by Cory Moffat

How about going from A very frequent poster on the old old barn to a nobody here Lol.

A blue tooth speaker sitting on the package tray. Great sound and listen to any radio station in the word for free. Also you can answer the phone hands free. Have a power inverter wired in to keep them charged. However most of the time I prefer to listen to the car.

My 20 Ton swaged em just fine

If it takes you two hours to change one spark plug that is better than two hours in front of the Computer or TV

Re: No Spark - NEED HELP! Is that a oil cooled coil mounted upside down?

Looks like mine years ago

I remember hearing/reading somewhere that the early heads were a little higher compression than the later ones. Not enough to be noted however. Dont know if that is true.

Years ago when I installed my Snyder's High Compression Head. I took note of this. The chamber shape was a more definite hart shape compared to the early 1928 Head. I installed a spark plug in the Heads and flipped them upside down and level. Using a syringe I filled the combustion...

Ya they don't stay clean forever. Looking at your picture makes me think of spending a summer day in the future cleaning.

i stop by the VFF and enjoy my reading there. But hey this is the Ford barn. As it was the Original ford barn before this. I tend to ask questions here first. I miss the original members and knowledge put forward. But hey I am getting old myself. Merry Christmas to both FB and VFF

Re: Brake drum (axle) retainers for Model A Mechanical raking Well I installed my hub retainers. I opted to install them on the bottom as there is lots of room down there.

So first try I put that odd .002" of an inch on the left side and ended up with .006" of backlash. Thanks for your imput.

Installing a 3:54 gearset. After getting my preloads done I am at the point of setting the backlash on the pinion. I have the carrier within .002 of dead center of the banjo with the axle housings installed. I just wanted to ask which way you shifted your carrier to find that sweet spot. Or...

Re: Brake drum (axle) retainers for Model A Mechanical raking

Re: Brake drum (axle) retainers for Model A Mechanical raking Thought I would make up the retainers before I dropped the rear end. There is quite the angle on the back of the retainer to follow the contour of the backing plate. The cage nut...