Re: Saginaw 525 in a 1950 Oldsmobile
I measured the 525 box up to my 50 Oldsmobile.
Two of the bolts Lined right up. I had to heat & pound in the curve in the frame
Slightly (the diameter of the new box is slightly Greater) I drilled the third hole
in the frame, Welded a round tube through the...
:)Need original 40 convertible windshield garnish molding Right & Left Pieces
Do not need center mirror hanger Piece.
Thanks Rick Rentschler
Napa, Ca.94558
707-738-1046
midyearvet@aol.com
Looking for a 40 convertible inside center garnish molding.
I know 40ragtopdown reproduces one. Lives in Elyria, Ohio
If anyone knows how to contact him. I would be very grateful.
Thanks for any help
Rick Rentschler
Napa, Ca.
midyearvet@aol.com
I made an overdrive to go behind A 350 turbo in the 60's out of a chevy od trans
I had the input shaft tested for Rockwell hardness. Had it annealed cut the
shaft to length, turned the diameter to size, splined it & had it heat treated
back to 60 Rockwell. I ended up with a 4spd automatic with...
Looks like it can be adjusted on the back side.
A small screw driver thru the hole on the back can be used to rotate that 1/2
gear varying the pressure.