Recent content by chucksue

Can anyone help me identify this ford mirror??? I hope I got this posted right!!

no pressure cap. I ordered a new cap. The problem was the mixture of the antifreeze. I had too much antifreeze and not enough water. drained it out and replaced with 50/50 and now runs perfect. I thank everyone for the help. Flatheads forever!!!!

Thank everyone for the come back. Will try new cap and install overflow tank. Will let you know the outcome!

Gauge reads ok. I have only one gauge in the drivers side head.

I have a 35 ford with a 37 flathead. New water pumps new core new thermostats. When the motor is cold thermostat is closed. Motor warms up thermostat open. I plugged the overflow tube and drilled and threaded a fitting in the radiator cap. Put a balloon on the fitting and started the motor. The...

Found box

Looking for a steering box with pitman arm. 1956 truck.

OK . The part number is 910-31974 and it is for a 58 thru 64 Chevy ,drum /drum.

The uint was given to me. I will check with Speedway and see what it is designed for. I have original drums and brake cylinders.

I am installing a vac. brake booster and a master cylinder in my car. The master cylinder is a chevy setup from speedway. do I need a proportional valve in the rear brake lines?

I found out when i got the new cable not only do you have to shorten the spring there is no washer on the upper side of the spring. I machined two pins to replace the missing washers. The pin is milled from end to end 9/32 inch. One end is counter bored so the spring sets inside it and the other...

I am running 1940 hyd. I bought the spacers from speedway.

My spacers are heavy. Can you send pictures of the wheels and how much do you want for them?

I am in central illinois. I have the spacers.

Well I am going to paint them and see how they do. Not many good wheels left. Don't know if I could straighten them.