Recent content by cbabek

Thanks Guys Chris

I foolishly broke one of the fiber gears in the Stewart Warner speedometer adapter in my 36. I know there are many different ratio's that were used over the years. - I had another later model adapter and looked at the gears and they are different diameters/ ratios. - I thought this was the 1:1...

Appreciate all the response - I am going to also get a viton tipped needle also !

Thanks Terry, this one has the spinnning terminal and wont register any Micro Farad's - but I will try with one of the NAPA IH 200 's I have ordered. hoperfully I will get a solid reliable condenser and a "stock" appearance. Chris

Appreciate the responses! i have a higher quality 1 to 4 psi regulator with a gauge and seems to regulate and hold the pressure consistently, I am going to back the pressure off to around 2 , seat the needle and see what happens thanks, Chris

Hope everyone is well fuel pressure question 36 ford stock 221 with mechanical pump and stock Stromberg 48 I am in Fla and had vapor lock problems with the heat in the past - installed an inline pump and regulator near the tank. I have it set for about 2 3/4 lbs pressure up to the...

I have been having a hard time finding a late 36 flat top coil condenser. - I bought a 37 to 40 with the ground strap soldered to the side of the body and de-soldered it and resoldered it to the but end like the original. a couple of questions : - can/ should you solder on a condenser ? if...

Video link https://www.youtube.com/shorts/Ivq8KG5XhDc

i expected that - but its excessive - I wish I could post video - I would expect 3/16 or a 1/4 - but not 3/8

All, I have a 37 gemmer style steering box in a 36 and I am having some backlash issues. when the sector is in the middle and the gears are adjusted with minimal drag - when the wheel is turned to either left or right there is significant play in the box. I replaced the worm gear that looked a...