Recent content by castiron

  1. C

    36 Spare Wheel mount.

    For watersealing or maybe to keep the bracket a little off from the paint.
  2. C

    36 Spare Wheel mount.

    Thank You very much,thats what I was thinking too,They probably didnt care about the paint under the bracket at the factory.
  3. C

    36 Spare Wheel mount.

    Anyone knows if there should be some kind of gasket between mounting bracket and body?
  4. C

    36 5 window door glass

    Have sent You a couple of messages.
  5. C

    8BA head

    Its for the ground cable.
  6. C

    This one is in the way...

    Is the 8 BA generator bearing and end front end plate strong enough to be used with a fan?
  7. C

    Glass pattern

    Need a pattern for a 1936 5W coupe door glass. Thank You.
  8. C

    37 Clock in a 36 Glove Box

    I think the cc between the holes for the handle is not the same,37 is a little wider.
  9. C

    '36 Part Question

    I think I got it wrong,the the bigger brackets with two mounting holes are in the front and these two is mounted a bit further back.
  10. C

    '36 Part Question

    Hi Bob,these are also attached on the fender lip but closer to the radiator for the hood side to rest on.
  11. C

    Circuit breaker? & Resistor unit Question

    I think by cooling down.
  12. C

    '49 8BA Fuel pump line and rubber flex line

    I had the same problem. My rubber hose was not made for using a bead to seal, I had to make a cone on the tube instead.
  13. C

    Cars with original radios

    Does anyone knows where to get a curved glas for the 36 radio head?
  14. C

    '36 glovebox lock

    When I changed from the pullhandle to a 37 lock the holes did not align.As I remember the lock was wider,not much but enough.Maybe the holes for the pullhandle is different from a 36 lock too??
  15. C

    '36 glovebox lock

    The cc between the holes is not the same on 37.
See more
Back
Top