Recent content by c277687

Thanks for letting me know.

Thank you very much. Now I know what to look for. Much appreciated. Brad

During teardown, I noticed that something appears to be missing from my front seat frame. The only thing holding it in was the adjuster at the front. Looks like some kind of seat track that runs on the rails is missing. Can anyone help me out? See photos attached. Thanks, Brad

Thank you Tom. I think I'll go with Poplar.

Thanks JayJay. I think finding a fellow owner of a Town Sedan seems like the best way forward. I appreciate the info.

Can anyone supply the dimensions for the rear seat cushion wood for a 1930 Briggs Town Sedan? I know the general shape and would like to make my own since none of the suppliers stock it. Any help, even with pictures would be a great help. After owning this car for 61 years, and never having...

Looking for a right hand spindle for a 1936 sedan. Gong back to mechanical brakes. Thanks, Brad

Need a 39 pedal assy to convert my 36 slantback to juice brakes.

I'm new to flatheads. I've got a 36 slant back torn down to the frame and the one thing I would like to do is add juice brakes. I'm told the 39 pedal assy should fit with no issues but since the 35 to 40 frames were basically the same, can I use a pedal assy from a 1940 without any modifications?

That's it! Thanks Bill. I thought there had to be special nails for the metal panels. Looks like I'll fit the panels with flat head screws. Brad

Thanks Benson but this is beyond the point where I'm at. I need to secure the top sheet metal to the rails. Thank you for the link. I haven't been able to get to Marcos site for some reason. Brad

Thanks rotorwrench. Hopefully someone can help me. ...Brad

I'm getting ready to install the top on my leatherback Vicky. See picture: 1) What are the red circled holes for? They measure ~ 3/16" 2) Do I nail down the top sheet metal thru the small holes in blue?

I'm ready to nail down the top sheet metal to the top rails but neither nails from the vendors will work. The heads slip right thru the 3/16 holes. What are you guys using for attaching the sheet metal? How about #6 screws, 5/8" long? See picture: 1) What are the red circle holes for? 2) Do...

Thanks David