Recent content by Bullet Holes-n-Rust

Looking at the picture on Vanpelt Sales website, the raised shoulder faces the front. http://www.vanpeltsales.com/FH_web/flathead_transID_3speed-gears.htm

Hello, I've recently disassembled a couple steering column assemblies while upgrading my 35 . On one of them I encountered a second upper bearing that was just above the lock collar. When I got the mast jacket up about an inch it stopped. I still had the column drop secured to the mast jacket...

Reviewing the schematic from Vanpelts that Zeke3 posted, the brake lights receive power from the 14amp fuse. They work, that tells me the tail light sockets have good grounds. The lighting switch gets power from the circuit breaker. Do your headlights work? If so that might tell me power to...

Is the original transmission still in the car? It may have numbers on it.

I pulled the radiator from my 35 last week, maybe you're missing some hardware between the inner fender and the latch bracket?

This is what I'm planning on my car. I just hope the switch shaft is straight enough to not turn with the steering column.

Vanpelt Sales has wiring diagrams on their website in Parts Drawings/Electrical. I'm using them to rewire my 35.

Hello, last month I disassembled a couple 35 steering column assemblies. On one of them I encountered a second upper bearing that was just above the lock collar. When I got the mast jacket up about an inch it stopped. I still had the column drop secured to the mast jacket and just used a dead...