Recent content by Brianpfreeman

Looking for a wire mesh screen for my Holley 2100. Running a speedway air scoop, I have tried the Holley 94 screen I found online but it’s too big and won’t fit. Could someone direct me to a company that sales a screen that fits on top of the carb. Not wanting a paper filter.

I’m fine with inspecting it while it off but my understanding is you can’t install the pump as try to put the oil pan Back in with the engine installed. Is that right?

I need to do the same thing. My plug won’t come out to put a holder in place for the oil pump. Any other way to hold the pump?

Old thread but curious, have to take my oil pan off to fix strip drain hole. My fitting on the side of the block won’t come out. Can I hold the pump in place from the valve cover?

Snyders only showed complete assemblies. I’m looking just a couple coil springs replacements.

Have a seat frame for my 30 coupe. Bottom cushion frame is rusty and have 2 coils broken. Does anyone sell replacement coil springs for the seat? Trying not to buy a new seat assembly if I don’t have to.

No it’s a random spring and baling wire. Home made repair I’m sure of it. One of the pins was installed in the wrong opening on the Clevis end too.

I applied some heat and straighten them all this afternoon. Used a long metal ruler as straight edge. Most off 1/4-1/2” Bend. Vehicle had some weird springs and home wire attaching them, probably the reason some got bent. Feel good about them now. Let them cool, sanded and painted.

Rebuilding brake system to get the 30 coupe road worthy. Just rebuilt cross shaft and all brakes at the wheels. Reinstalling the rods soon and noted several have minor curves or minor bends. Are the rods suppose to be true straight?

Wanting a set of center caps with ford logo to fit my 35 wire wheels. No V8 logo. Anyone have a set?

Looking for 18th amendment plate for put on my coupe. Doesn’t have to be perfect. Message me if you have one and some pics.

Might take the hood to get it scanned. Guess it’s possible it could be a left over 29 color? It is a early 30.

Wanting to paint my firewall before I instal my engine. Not painting the exterior at all, just keeping the Original looking paint since I was told it’s original. Can’t tell what color green this is. 1930 Coupe. Was told it’s a early based off the dash. Help me out fellas.

Rebuilding front end and front brakes on 30 coupe. When I took the operating pin out of the brakes there was a harden gasket on one end of the operating pin. When I was cleaning every up, the gasket broke down and felt like a felt washer. If there suppose to be a felt washer or something on the...

Okay, next question is what green is this? I buff the quarter to see how it looks likes. Not painting body but wanting engine bay looking fresh. Plan on painting firewall.