Recent content by BoxCar Tom

When was the last Conestoga Wagon Round Up?

The 32 three win rear glass measures 30 1/2" wide X 10" tall. The curve at the top of the glass matches the curve of the window opening and the interior garnish molding.

Front and rear 32 Ford plate adapters, yup the rear plate is mounted on the passenger side, no interference when refueling

JOSH EWING, NW Classic Parts, Old Gold 360 on the barn. Excellent 32 Ford Floor Boards

It's an aftermarket replacement mirror with a clock attached on the backside. The reflective silver is omitted where the clock is attached so that the clock face is visible thru the mirror glass. They were available for Model "A"s with a side winder knob. A later version was introduced around...

Some time ago I heard that the long version mirror is for long bodies, sedans and the short version is for coupes and roadsters. Any truth to this? I have short and long version Clock mirrors, not sure which one to use in a 32 roadster, Thanks,

Hi Mart, Thanks for the response and very informative video. The glass stops hard in the same spot. There is no slow down or jamming like binding in the channel. Im starting to think one of the regulator attachment screws got loose, backed out and is interfering with the regulator arm...

Thanks again for the replies, Window stops about half way up. giggle the glass while cranking, stops same spot. Removed the garnish molding, Flash light and slim jim both sides, nothing, I'll take it apart hope nothing is broken, grease everything, put it back together Let you know...

Thanks for the response, im trying to avoid taking the car apart if I can. Maybe unavoidable.

hope this helps

HI, Happy Fathers Day The passenger side rear window on my 32 tudor will not go up all the way. It's getting stuck about half way up, something interfering? Anybody else have this issue? Any fix ideas? Thanks,

home made mounts sbc on 32 biscuits

Tomfish36, By "cast pivot blocks", do you mean the cast iron pieces that are riveted into the upper corners of the deck lid? Those pieces were designed to rotate on the rivet, that movement provides adjustment of the deck lid.

Wanted 1932 Ford original upholstery. I need take out upholstery to use as patch material to repair my tudor sedan front seat. What do you have? Thanks,

A word of caution, since your restoring a 32 3W be sure to attach the glove box on the back of the dash panel then install that two piece assembly into the body before the body is installed on the chassis. I think David Rehor gave me this advise sometime in the past. I either ignored it or...