Recent content by bobd

Have you checked the gas I had a very similar problem ansd it turned out to be the gas. Drained it out put in new gas and it's over a year now it's been fine

Thanks everyone for the advice,I'll try the u-bolts but I am probably going to replave the spring, shackles and U-bolts. I let you know how I make out.

No it does not rub. Just leans to the left real bad. Almost two inches different from side to side

Mine is leaning pretty bad to the left. I was told it's the front spring. I know the clearance between the spring eye and the axle is way to close.

I have a 1931 Model A Pickup. I think the front spring may need to be replaced due to the truck leans to the left. Does anyone know any measurements or other ways to see if the spring needs to be replaced.

OK Thanks, The truck belongs to a friend of mine he just got it and we don't have much information at all about them. I will post more as it goes. I am located in Vineland NJ

Does anyone know where I can get some information on a Ford Model BB truck.This one has dual wheels.

I have a 32 motor in my 30 pickup. I want to sign up but can't figure out how. Can you help me. I rebuilding the 32B carb and have some questions.

I guess you call them stabilizers. The tube that goes from behind the transmission to the axle housing where the backing plates bolt on. The one on the drivers side is split on the bottom about 2 feet long. Also it looks as though the tube has is bowed up just a little. Will this cause any...

Thanks for all the ideas. So far I have by passed the switch. It doesn't blow the fuse when by passed and have ordered another one from Mikes. The funny part is there is no shorts showing any where on the switch. I'm going to pull it out & hook it up to a battery to check it out further & see...

I replaced the stoplight switch on my 30 pickup. The lights are hooked up thru a 30Amp fuse. Every time I put the brakes on the fuse blows. There are no shorts any where, the switch is not shorted either. I can't figure this problem out. I've fixed a lot of electrical problems but this one has...