Recent content by bigdaddyslotrat

yo this might be a dumb question for some but i need to know the order of the bolts and spacers for the radiator on this 28 pick up with fenders and all the other stuff that comes on these trucks. thanks in advance:):):eek: Harley

thanks jim i found my temp.gun so i was wondering what temp. might the block and head read when it's all warmed up maybe the back part is not getting the cooling it need ?????????

:) thanks again guys right after it stops running it's hard to turn over:eek::eek: but wait just 2 minutes it's find and starts and runs fine till it does it again???:confused::confused::confused:

thanks for all the answers i to think it's tightening up and stalling:confused: so what rpm should we run at???? and the temp. of the water with a kitchen thermometer reads 150 almost 160:)

Well here i am again asking for help. (lol):confused: motor a 1932 diamond block freshly by somebody else. had a severe leak at the rear main (solved) was getting water in the oil (solved) but now after it runs for about 15 minutes is starts knocking a little and will stop running:eek::eek...

well sorry i haven't been on for a while but guess what?????:cool: i went ahead and made a new valve cover for the motor and in it i drilled and tapped 3 holes 3/8 national pipe threads.:eek: then i routed the oil from the tapped hole and back to the oil pan through the fuel pump block off...

Pc/sr what do you mean by modification ?? This pump has been modified and all i know is he put different gears and told me it should have 100 lbs. Well now it looks like i will have some more work ahead of me now. Thanks for all the information guy i'll keep you posted

please forgive i forgot to say the motor is a 1932,33,34 "B" diamond block. has high comp. head and pistons with a isky cam. and an oil leak out the back:p. my next question is will an oil filter system lower the pressure in the motor and relieve the pressure after turning off the...

Hi guys i have a question !! THIS IS A NEWLY BUILT MOTOR my oil leaks out the back of the motor is as follows, running at idle steady stream out the hole in the bell housing slightly higher rpms the leak seems to stop until you turn of the motor then a stream starts up again for about 4...

thanks guy i'll do just that

Hi guys i have a question !! my oil leaks out the back of the motor is as follows, running at idle steady stream out the hole in the bell housing slightly higher rpms the leak seems to stop until you turn of the motor then a stream starts up again for about 4 table spoons of oil. ok this motor...