Recent content by artron9

  1. A

    The knock off carbs on Ebay

    Carbs,pumps,dizzys! 2 words---Charlie Schwendler NY! Nothing more to say!
  2. A

    starter click?

    Thank you all! Solenoid gets the vote. I'll let you know. Much appreciated!!!
  3. A

    starter click?

    For a couple of days I have experienced an occasional click when starting my 52 Vic. Not all the time but once in a while. i cant tell if it is my ignition switch or the starter or the voltage regulator. The battery is ok and the car will eventually start. Any thoughts?
  4. A

    blower switch removal 52 Vic

    I may have a faulty blower switch. What is the correct way to remove it from the dashboard? Thanks for your input!
  5. A

    52 heater switch?

    Thanks Emmett51 and tubman!
  6. A

    52 heater switch?

    Hello My 52 Vic has a 2 speed blower switch. The low speed is working but not the high speed. I am getting an electrical odor on occasion and feel it is related to this problem. Heater motor is not warm or hot. Any thoughts? Thanks!
  7. A

    Henry Ford

    hotcoupe, thanks! I really enjoyed that film. Learned alot about Ford! Wish I still had my dad"s plant badge(Somerville Ma assembly plant) 1935 -1943, 1947-1957. Does this documentary continue beyond 1935? Thanks for sharing!
  8. A

    52-54 Ford heater vacuum line routing

    After spending a few weeks trying to get heat in my Vic, I solved the problem, thanks to many of you Ford people! Now that I have heat, I wanted to figure out why I could not control the temperature of the heat? the Ford manual tells how the system works but that is about it. The diagram of the...
  9. A

    52 v8 flathead heater

    Thanks MC!
  10. A

    52 v8 flathead heater

    Rayfry: the vac hose goes to the vac thermostat valve located in the heater plenum. It is actuated by the heat temp slider located on the Magic -Aire controller at the bottom of the dashboard to the right of the steering wheel. It controls the temp from OFF-HIGH. My heater problem is solved. I...
  11. A

    Flathead heater continued

    Good point Mark! Ill get back to the Barn later in the day with my results!!
  12. A

    Flathead heater continued

    Merc I'll get back to you!Cruzer: Good point on the hose to the water pump! Since I'm getting circulation within the core, maybe the exit tube to the lower block connection maybe blocked? I will remove the lower tube and see what is going on down there? Thanks to all of you for your advice! I'll...
  13. A

    Flathead heater continued

    Thanks guys! Ill be out there in the am. Oh! my coolant is GREEN does that count for something?
  14. A

    Flathead heater continued

    JSeery: Both flowing great!!
  15. A

    Flathead heater continued

    V8 COOPMAN: I agree with you! However, I was getting a total, clear flow of clean water coming through the heater core. I backflushed it first and then reversed the procedure. Both directions showed positive results. It doesnt make sense to me! I will repeat the process tomorrow and report the...
See more
Back
Top