Recent content by amuffler

Contact Aries Muffler 650-279-6609 Will not rust, comes with brass nuts.

if your problem is not solved call me for a free clamp designed to do the job. Free 650-279-6609 west coast

If not using our special rear clamp please call me I will send you one, the stainless expands much more than steel and must be able to move freely at the clamp. 650-279-6609

We have a new improved rear clamp, that should stop this from happening. Call me at 650-279-6609 west coast

The issues mentioned about the Aries Stainless Steel muffler were posted about 10 years ago. Since then we have taken steps to solve this issue of the the tail pipe breaking apart from the muffler. We found the expansion and contraction of stainless steel is 3 times as great a steel. We...

You might consider adding some additional welding at the seam, if you back fire, it will open up and ruin the muffler.

They only break because they are not mounted properly. The rear clamp has to sufficiently loose to allow for expansion and contraction. Not rattly loose, but sufficient to move if it has to. My stainless muffler has gone 27 years without the slightest problem. __________________ R.H.D. Author of...

You should have been using one of our insulated tail pipe clamps. The stainless steel mufflers expand quite a bit more than the steel ones. If you use a standard tail pipe clamp, it will not allow the movement required and eventually either the tail pipe will break at the back of the mufflers...

I am interested in your parts, I have a Model A Ford business here in Medford, OR please call Joe Davis 650-279-6609 Thanks

Call 650-279-6609 or email jdavis@amuffler.com we can ship the muffler in 3 pieces, you weld. I can ship by postal express, much cheaper than UPS or FedEx.

Restoring a 31 Slant Window sedan, need the left door post or complete cowl less gas tank. Let Me know. jdavis@aries-restoration.com

Sheet metal panels in rear that hold window regulators and bolt to body. Need two, right and left. These are under rear windows. Call Joe Davis 650-948-6424 or email jdavis@amuffler.com

very important: Both steel and stainless mufflers must have room to move, there is a great deal of thermal expansion. Failure to allow the tail pipe to move through the clamp will result in cracking or failure of the muffler at the tail pipe connection to the muffler, it will also cause bending...

We need the rubber inserts for the rectagular plates that go on the bottom of the Middle vertical bow. Does any body know who might make these? Also need the body plates that these bump against when the top is up. Email for picture jdavis@amuffler.com 650-948-6424

need turtle deck and lid for 1920 to 1922 Roadster. contact Joe Davis 650-948-6424