Recent content by Allinger

  1. A

    1932 Tail Light Lenses Question

    Thanks for the information.
  2. A

    1932 Tail Light Lenses Question

    In looking at some of my tail light lenses, I noticed a difference in the size and pattern of the molded diamonds. Does anyone know if this is a difference in year or aftermarket? See attached pictures:
  3. A

    Stuck rear drums on 33 Vicky

    Many modern rotors are held to the hub by tapered head screws. Maybe slotted head screws these are doing the same thing?
  4. A

    1932 5-window coupe door guts sequence

    Here's my cheat sheet for my Sedans... The procedure should be the same, although the glass install maybe different as the sedan glass is much longer. There are also some extra steps as I have updated my car with power locks and mounted sideview mirrors. Consider drilling additional drainage...
  5. A

    1932 installation instruction for top insert

    I know it's not Henry correct, but it's water tight and looks good. It held up in a daily driver during a hail storm that many modern cars sustained more than $10k damage. While the wood frame was out, I traced the hole onto 1/4 inch plywood from Lowes. I put roofing tape against the tacking...
  6. A

    1932 Headlight reflector WTB one, possible lens

    Attempting to make a complete set from pieces, but missing one reflector. I’m looking for the single bulb configuration. New ones are $25 so please price accordingly. Would also be interested in a lens because the one I have has a good size chip. Please contact me at allinger@comporium.net for...
  7. A

    1932 Model B Tudor closed top material

    I personally think the short grain Cobra pictured here is the better looking of the two. However, my supplier says he can no longer get it. Due to lack of choices, I put Mercedes Haartz cloth on my last build. I ordered some from Eckler's/MAC's last year and was disappointed with the quality...
  8. A

    1935 Window Crank Handles 3 (One Original)

    See Pictures: 2 unused Reproduction Chrome and 1 very good condition original Nickel plated. Part #48-702780-E $10 shipping in Continental US
  9. A

    Any demand for 32 Original Cardboard Sunvisors?

    These are out of an early 32 Sedan. I made plywood templates from these and upholstered them. Would they have any value to anyone with shipping costs what they are?
  10. A

    1932 Interior Sun visors and mounting brackets

    Sold
  11. A

    Flathead Exhaust Manifolds

    Sold
  12. A

    1932 Sedan Seats Front and Rear

    Sold
  13. A

    1934 Car Radiator Cap

    Used 1934 Car radiator cap 40-8100-B that is an original Ford with casting number visible. If it ever had any chrome or nickel plating on it, that is now a patina silver color. It has a couple tiny chips on the rear edge. I also have a new reproduction seal and brass washer set that I can...
  14. A

    Chopped Top Glass

    One of the biggest benefits to having the laminated safety glass cut locally is that you can take it back for any minor adjustments. Our glass shop was able to sand off that crucial 1/16 of an inch and round over a corner from my inadequate pattern.
  15. A

    Chopped Top Glass

    I have used both my local glass companies by making a cardboard pattern and bringing it to them, well-labeled. They buy large sheets of 1/4 inch laminated glass (2 thin sheets bonded with a plastic layer in between that measures 1/4 inch total thickness) and cut it/sand it to fit my patterns...
See more
Back
Top