Recent content by ALJ

  1. A

    Babbit Doctor?

    Ford-N-More at Antique Auto Ranch in Spokane did some babbitt bearings for me years ago. Try 509-535-7196.
  2. A

    Wesenberg EVR- voltage cycling problem

    I want to put a mechanical voltage regulator on my car as you describe in your post. What would you suggest as the best way to run the wire from the 3 rd brush out of the generator?
  3. A

    Thank you mike's

    I like Berts, Snyders and Mikes.
  4. A

    Voltage regulator

    I think this would work with a late 1930s or 1940s Ford car regulator. The regulator would be mounted on either side of the firewall. The 3rd brush would be removed from the generator and the wire from the field winding that had been on the 3rd brush would be brought out of the generator case...
  5. A

    Loading Pictures

    A Uniform Resource Locator (URL), colloquially termed a web address, is a reference to a web resource that specifies its location on a computer network and a mechanism for retrieving it.
  6. A

    Pair of Model T Side Lamps

    A pair of side lamps, oil burner type, wick and burner are missing, lenses are good.
    • ALJ
    • Thread
    • Replies: 0
    • Forum: Model-T
  7. A

    Transmission Oil going to Differential

    Thank you. I will get the carpet and boot out of the way and check that.
  8. A

    Transmission Oil going to Differential

    I wasn't aware of a vent hole in the shifter tower. Where is it located?
  9. A

    Transmission Oil going to Differential

    My 1931 Model A Coupe. Transmission oil is leaking into the differential. I know that because the oil level in the transmission goes down and the level in the differential goes up. I’m using 600 W oil purchased from the parts suppliers. I don’t know if the rear transmission bearing seal is...
  10. A

    Wax in a generator?

    I have been thinking that one of these regulators should work on a Model A. Have you done it? How did you handle the 3rd brush in the generator? Did you run a wire from the 3rd brush through the generator endplate to the field terminal on the regulator? I would appreciate your comments on...
  11. A

    I think it's time to move to an alternator

    Do you have the manufacturer and model number of the 6 volt regulator? Did you use it on a Model A?
  12. A

    Over Heating

    Utopia Texas makes a good point about radiator fins. If the fins are not tight the radiator will not cool.
  13. A

    Voltage regulator

    Has anyone used a tractor voltage regulator on a Model A? If so, what kind and how is it working for you?
  14. A

    I think it can be saved.

    Coil springs, not a Model A.
  15. A

    Hood supports

    My car had them when I bought it. I will leave them on but if I didn't already have them I wouldn't get them.
See more
Back
Top