Recent content by A29FORD

Btt

Model B Engine - 4 cylinder - NO LONGER AVAILABLE Model B Engine - 4 cylinder - NO LONGER AVAILABLE • Engine is disassembled except cam and valves still in block. • Block has 2 small cracks in valve area. • Head is missing; however, pan, crank, fuel pump, starter, generator, water...

I just started to reassemble my brakes today. Your response is greatly appreciated, thanks Tom. I'll grease them.

Having read the previous posts I guess I need a clarification on one item. Maybe this a misunderstanding on my part, but isn’t the roller pin that rides on the roller track supposed to, well, roll or turn when the brakes are activated? I would think that greasing the roller pin head would...

I’m using a modern grease gun with mystik JT6 grease. I have to press the tip tight-tight against the fitting or I'll lose everything pumped. I've managed, after pushing hard on the pump handle, to get a blob of very black grease about the size of a BB to exit at the brake lever end of the...

Yes, I can see the shaft through the hole in the bushing after taking the grease fitting out. Let me add more info about this problem. I know these parts were replaced several decades ago but only have a few hundred miles on them. I dont know if the bushings come with a groove for grease to move...

After installing new rear brake camshaft and new camshaft bushings the grease fitting on the rear brake track assembly wont take grease. Is this normally the case when changing out these parts? I know the fitting is open as I have taken it out and checked it. Thanks kindly