Recent content by A-Brougham-Drinkin'

Thanks! hopefully someone up that way will get to it~ or get it to a place it can be used for a parts donor.

Thanks!

Can someone please post the general location of the truck. I see many usable parts in just one photo. CCPUs are usually rough, but not that common. The one in my albums was almost as bad, but was made a daily driver by plopping it on another chassis, adding new wood and almost no bodywork. My...

If it's temporary and you're jazzed to hear it run and you're already physically holding a stock dizzy- could you block off one carb with a thin plate then connect the L.A.M. vacuum line to a stock 94 type carb? Would that give you a pretty good idea of the motors other characteristics or be...

Touring car project needs many aspects addressed. Please p.m. with any leads on original parts in good or bad condition. Interior, top, windshield, fenders etc. Especially need ignition components. Thanks! -Chris

Re-post. Thanks

For Sale- '29 AA mostly complete, unrestored except for doors replaced and partially functional. Orange Forest service paint job on black fenders. Typical damage from use, but only minimal rust in cowl and door bottoms and fairly complete overall. Located half way between Denver and Loveland...

Mine will leak a bit from the plug in the flat catch pan side if transported upright while full. It does store upright nicely if empty or level is below drain in side. To its credit: has a little flat to rest the filter with a gap under it so it drains, is cleaned with just a wipe up, never...

Is there a little bit of pickup bed peeking out there too? Sport/business coupe can make a good looking roadster. Having no bead along the bottom of the body like a true roadster makes for a really small, racy looking car. Good luck with the snake/ spider relocation program!