Recent content by 64steve

Hi everyone! I have a 64 F100 and my master cylinder is slowly going bad , i wanted to upgrade to a dual bowl style but having slight issues , issue number one is i bought a 67 289 mustang master cylinder part number #MC36222 and fits but the rod is too long (look at attached image) so i checked...

Hello everyone , i have a 1964 F100 and has the original 1 bowl master cylinder and i’m started to experience some brake fade when sitting in traffic so with that being said has anyone here have any experience on what factory style dual master cylinder works? looking for non powered and...

hello i’ve been away from my computer due to school and work but i appreciate you responding , but since i posted this ive done a bunch of tests , i tried a headlight switch to no avail , i checked my grounds and voltage drop tested them and had .02v which im happy with , i checked the black and...

I have a 1964 F100 and have a weird problem , when ever i put a load ( headlights brake lights or turn signal) my interior lights flash along as if i’m having a serious voltage loss , my voltage gauge connected to the fuse box also drops and goes up with the turn signal , i thought it was a...

turned out to be just a stuck clutch , clutch in other foot on the brake and putting the truck in first gear and cranking it over got it un stuck!

wanted to give an update and thank you , called them and while they didn’t sell me a complete rebuild kit they atleast sold me the adjuster plate which was enough to take care of 90% of my excessive play , they were great and understanding and i want to thank you again !

Hello everyone I have a 64 F100 that i recently removed the steering box in order to rebuild and i had to remove the arms going from the pedal to the z bar and from the z bar to the clutch fork , got everything back on and how it’s suppose to be and now i have no clutch at all but when i parked...

I did , we talked and helped me adjust it before taking the steering box out but he said he doesn't do these and sadly cant point me in the right location , but i may try to call them up and see if they have anything , but yes i do have the ford workshop manual and my boss who's rebuilt many...

Hello everyone! I have a 64 F100 and took the steering box out in order to rebuild as i had extreme play in the box , i found out my adjustment plate had broken causing the pitman shaft to walk , alongside this the pitman shaft is worn and my steering colum is worn so bad the piece where the...

2WD Ms and i’m not sure what you mean by rating plate?

Just gave him a call and left a message , hopefully he’s able to help me out!

Hello everyone! I have a couple questions regarding my f100 , first all i was wondering if anyone here has dabbled into converting the single master cylinder to a dual one and kept drum all the way around? im building a day 2 inspired f100 and want to keep it as period correct as possible so i...

i agree with you on the foul plugs , i’m gonna take cylinder #1 out and check it out and see how it is

though what confuses me is how it ran fine when i first out everything togther which is why i don’t think it’s something with how it’s setup but who knows… like i said i’m gonna drive it around this weekend and see how it does and report back

hey gene! sorry i just got back from testing it. it definitely runs better but it still does it a bit but it seems with every drive it gets better. i’ll be head up some shows this weekend and see what it does. i haven’t asked my neighbor yet but he told me to replace all three floats (as i just...